6MM X 16MM THRU HOLE WELD PIN-3 PROJ
Item No. PHM 06016-P40
Loading
The PH weld pin has three identical precision projections on the underside of the head permitting the pin to be used on through-hole applications. These projections also permit exact positioning and balance for optimum welds. In through-hole applications, the head of the pin is welded to the
Description
The PH weld pin has three identical precision projections on the underside of the head permitting the pin to be used on through-hole applications. These projections also permit exact positioning and balance for optimum welds. In through-hole applications, the head of the pin is welded to the component''s metal making a joint stronger then the surrounding area. This great strength makes the PH weld pin ideal for hinge pins, bearing surfaces, structural supports and stops.
Specifications
- A
- 15.500 (mm)
- Tol A
- +0.30/-0.30 (mm)
- D
- 6.000 (mm)
- Tol D
- +0.00/-0.13 (mm)
- F
- 1.040 (mm)
- Tol F
- +0.05/-0.05 (mm)
- H
- 2.100 (mm)
- Tol H
- +0.13/-0.13 (mm)
- L
- 16.000 (mm)
- Tol L
- +0.40/-0.40 (mm)
- P
- 2.740 (mm)
- Tol P
- +0.13/-0.13 (mm)
- Body Diameter
- 6.000 (mm)
- Finish
- COPPER FLASH
- Head Diameter
- 15.500 (mm)
- Length Under Head
- 16.000 (mm)
- Material
- C1010 High-Welding Quality, Low Carbon Steel
- Unit System
- Metric
Item No. PHM 06016-P40
Loading
* Images are of plain finish items unless otherwise specified
​​​​​Looking for compliance information on this item? Visit our compliance portal for all related information here -> Compliance Portal
6MM X 16MM THRU HOLE WELD PIN-3 PROJ
Item No. PHM 06016-P40
| Finish | COPPER FLASH |
| Net Weight | 0.0145 |
Description
The PH weld pin has three identical precision projections on the underside of the head permitting the pin to be used on through-hole applications. These projections also permit exact positioning and balance for optimum welds. In through-hole applications, the head of the pin is welded to the component''s metal making a joint stronger then the surrounding area. This great strength makes the PH weld pin ideal for hinge pins, bearing surfaces, structural supports and stops.
*3D models are nominal. As-formed features (radii, projections, lock marks, etc.) may vary. Please refer to the product drawing or spec sheet for exact dimensions.
*Please log in for pricing and availability
Specifications
- A
- 15.500 (mm)
- Tol A
- +0.30/-0.30 (mm)
- D
- 6.000 (mm)
- Tol D
- +0.00/-0.13 (mm)
- F
- 1.040 (mm)
- Tol F
- +0.05/-0.05 (mm)
- H
- 2.100 (mm)
- Tol H
- +0.13/-0.13 (mm)
- L
- 16.000 (mm)
- Tol L
- +0.40/-0.40 (mm)
- P
- 2.740 (mm)
- Tol P
- +0.13/-0.13 (mm)
- Body Diameter
- 6.000 (mm)
- Finish
- COPPER FLASH
- Head Diameter
- 15.500 (mm)
- Length Under Head
- 16.000 (mm)
- Material
- C1010 High-Welding Quality, Low Carbon Steel
- Unit System
- Metric