Manufactured By the Ohio Nut & Bolt Co.
WFM Weld Nut
WFM part diagram
PDF Spec Sheet



CLICK PART NUMBER, FOR 3D CAD MODEL, CHECK PRICES,
or PLACE ORDERS
Part Number Thread Size Head Diameter Head Length Projection Body
Thickness Overall Diameter Height Diameter
Tol. Tol. Tol. Tol. Tol.
+ 0.13
- 0.13 		+ 0.2
- 0.3 		+ 0.13
- 0.13 		+ 0.05
- 0.05 		+ 0.1
- 0.1
A H L P F D
WFM 03507 M3.5 x 0.6-6H 12.0
± 0.35 		1.90 7.5 1.78 0.64 5.3
WFM 04008 M4 x 0.7-6H 14.0
± 0.35 		2.20 8.0 2.13 0.81 6.3
WFM 05010 M5 x 0.8-6H 16.0
± 0.35 		2.50 10.0 2.54 1.02 7.1
WFM 06012 M6 x 1-6H 2+ 0.0
± 0.45 		3.10 12.5 3.10 1.20 9.0
WFM 08015 M8 x 1.25-6H 25.0
± 0.45 		3.80 15.0 3.56 1.40 11.3
WFM 10017 M10 x 1.5-6H 27.0
± 0.45 		4.50 17.0 3.81 1.52 13.4

WFM Weld Nut image

On the WFM weld nut, the projections are located right on the top of the flange to permit welding to (rather than through) the surface of the component. Three precision projections of uniform height and mass are properly positioned on the flange to assure a weld that leaves the exterior surface of the component virtually unmarred.



Material and Thread Information

Material:

 C1010 High-Welding
Quality, Low Carbon Steel
Finish: Plain, Unless Specified
Threads: ASME B 1.13M-2005